61 jobs found

The Department of Health and Human Services – Environmental Health Division is currently seeking candidates for the Consumer Protection, Hazardous Materials or Solid Waste Programs. Under supervision, the Registered Environmental Specialist Assistant performs scientific and professional level office and field work to ensure compliance with environmental laws and regulations. The primary responsibility of staff assigned to the Consumer Protection Program is to ensure compliance with regulated food facilities, body art facilities, swimming pools, public drinking water systems and campgrounds. The primary responsibility of staff assigned to the Hazardous Materials Program is to ensure compliance with laws and regulations pertaining to business facilities that handle hazardous material or hazardous waste, operate underground storage tanks and above ground storage tanks that store hazardous materials or waste, emergency response to incidents involving hazardous chemical releases, planning and site mitigation. Staff assigned to the Solid Waste Program conduct compliance inspections and support solid waste disposal facilities and resource recovery and recycling programs, waste tire management, medical waste management and nonhazardous waste recycling and management programs.

THE POSITION DEFINITION To perform professional electrical engineering work in the planning, design, technical investigation, and construction of public works and building related projects. DISTINGUISHING CHARACTERISTICS This is the full journey level class in the electrical engineering series requiring registration. Positions in the class are flexibly staffed and are normally filled by advancement from the lower class of Assistant Electrical Engineer, or, when filled from the outside, require prior advanced professional electrical engineering work experience. An Associate Electrical Engineer works under general supervision and is expected to complete complex electrical engineering assignments requiring the use of judgement and initiative in developing solutions to problems, interpreting general policies, and determining work assignments. Work in this class is distinguished from that of the Assistant Electrical Engineer class by the greater complexity of the assignments received and by the greater independence with which an incumbent is expected to operate. SUPERVISION RECEIVED AND EXERCISED Direction is provided by a higher level professional engineer or a division head level position. Responsibilities of an Associate Electrical Engineer may include the direct or indirect supervision of lower level professional engineers and technical personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES Depending upon assignment, duties may include, but are not limited to, the following: Supervise and participate in the preparation of plans and specifications for the construction of water utility, street, storm drain and sanitary sewer pump stations, street lighting, traffic signal, buildings, and related public works and City building projects; research project design requirements; perform complex calculations and prepare estimates of material costs and time considerations. Assign routine inspection, investigation, design, and drafting tasks to technical subordinates; review completed work; assist in the solution of difficult problems. Research building codes, publications, and industry information sources. Develop and revise design and construction standards. Participate in the implementation of the City's traffic and transportation engineering programs; prepare and revise plans and specifications for traffic related projects; prepare special studies and reports and coordinate major projects. Participate in the City's Building Code Compliance program. Investigate field problems affecting property owners, contractors, and maintenance operations. Order survey, mapping, and data collection. Prepare estimates and feasibility reports for new or modified services and structures. Administer contracts for construction projects. Participate in the plan check, review, and processing of plans for private developments affecting streets, sewers, drains, and relate public works facilities and ensure that they meet all City imposed requirements. Check building plans for compliance with City building codes and ordinances. Prepare special engineering studies and reports. Serve as staff to a variety of City commissions, boards, and committees on public works, utility matters, or building code appeals issues. Coordinate planning, design, and construction activities with other City departments, divisions, and sections, and with outside agencies. May supervise, train, and evaluate lower level professional, technical, and clerical subordinates. Other related duties may also be performed; not all duties listed may necessarily be performed by each individual holding this classification. QUALIFICATIONS Knowledge of : City engineering policies and procedures. Principles of supervision and training. Principles and practices of electrical engineering as applied to public works, utilities, traffic, or building construction projects. Methods, materials, and techniques used in the construction of public works, building and utilities projects. Modern developments, current literature and sources of information regarding electrical engineering and building codes and ordinances. Ability to : Perform complex professional engineering work with a minimum of supervision. Supervise and train subordinates. Make complex engineering computations and to check, design, and supervise the preparation of engineering plans and studies. Communicate clearly and concisely, orally and in writing. Use and care for engineering and drafting instruments and equipment. EXPERIENCE AND EDUCATION Any combination of education and experience that would provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Experience: Two years of experience comparable to that of an Assistant Electrical Engineer in the City of Sacramento.   PROOF OF EDUCATION Should the combination of experience/education you are using to qualify for this position include education, then proof of said education in the form of college transcripts, certificates, and degrees must be submitted to the City of Sacramento Employment Office in person, as an attachment(s) to the online application, faxed to (916) 596-1556, or emailed to employment@cityofsacramento.org by the final filing deadline. If submitting in person or via fax/email, please include your name and   Job #   011020-19-UTIL-2   on your documents. Unofficial documents and/or copies are acceptable. An applicant with a college degree outside the United States must have education records evaluated by a credentials evaluation service. This evaluation must be submitted by the final filing deadline. License or Certificate: Possession of a Certificate of Registration as a Professional Engineer in the State of California. Certificate of Registration as a Professional Engineer must be verifiable. Proof of Certification: Proof of Certificate of Registration as a professional engineer in the State of California  must be submitted to the City of Sacramento Employment Office in person, as an attachment(s) to the online application, faxed to (916) 596-1556, or emailed to employment@cityofsacramento.org by the final filing deadline. If submitting in person or via fax, please include your name and  Job   # 011020-19-UTIL-2  on your documents. PROBATIONARY PERIOD Employees must successfully complete twelve (12) months of probation at a satisfactory performance level prior to gaining permanent status. THE SELECTION PROCEDURE Please note, the City of Sacramento's preferred method of communication with applicants is via e-mail. As such, please ensure you verify the e-mail address on your application, and check your e-mail frequently, including your spam and junk folders. All e-mail notifications can be accessed through the governmentjobs.com applicant inbox. 1. Application:   (Pass/Fail) – All applicants must complete and submit online a City of Sacramento employment application to the Employment Office by the final filing deadline; Employment applications must be submitted online; paper applications will not be accepted. Employment applications   will be considered incomplete and will be disqualified: If applicants do not list current and past job-related experience in the "Work Experience" section.   Note: Qualifying experience is based on 40 hours per week (pro-rated if less than 40 hours/week). If "see resume" is noted in the "Work Experience" section; a resume will not substitute for the information required in the "Work Experience" section. Proof of required education and/or degree equivalency must be submitted online with your application, emailed to  employment@cityofsacramento.org , delivered in person, or sent to the Employment Office by fax or mail by the final filing deadline. 2.   Supplemental Questionnaire : (Weighted 100%) – The Supplemental Questionnaire is the Training and Experience Exam. Only the applicants who meet the minimum qualifications will become candidates and their supplemental questionnaire will be rated and scored. This exam will evaluate the relevance, level, and progression of a candidate's education, training and experience. Therefore, your responses to the supplemental questionnaire should be thorough and complete because the exam score will determine your ranking on the eligible list for this job. When completing the supplemental questionnaire, please note: Responses to the supplemental questionnaire   must   be submitted online; paper questionnaires will not be accepted. Incomplete supplemental questionnaires will not pass the review process; omitted information cannot be considered or assumed. A resume will   not   substitute for the information required in the supplemental questionnaire. 3.   Eligibility   - Candidates who pass the Training & Experience evaluation will be placed on an eligible list. The hiring department may contact candidates for interview at any time during the life of the one-year list.   4.   Conditional Hire:  Upon receipt of a conditional offer, the selected candidate must complete and pass LiveScan / fingerprinting review by Human Resources, a pre-employment controlled substance and / or alcohol test, and possess any required licensure or certification prior to receiving a start date from the Department. Failure to meet these prerequisites will be grounds for withdrawal of your conditional offer of employment. QUESTIONS: For questions concerning this job announcement and the application process: Please visit   https://www.governmentjobs.com/Home/ApplicationGuide   for a comprehensive, step-by-step guide to the application process. For technical support between 6 AM - 5 PM PT, contact Live Applicant Support at (855) 524-5627. Visit the City of Sacramento Human Resources Department website at  http://www.cityofsacramento.org/HR/Career-Opportunities; Send an email to  employment@cityofsacramento.org ; Call the Human Resources Department at (916) 808-5726; or Visit the Human Resources Department at Historic City Hall, 915 I Street, Plaza Level, Sacramento, CA

OFFICIAL DMV PRINTOUT IS REQUIRED AT THE TIME OF APPLICATION   Only official K4 DMV printouts issued by the Department of Motor Vehicles are acceptable. Online DMV printouts will not be accepted. Cleans and services all Elk Grove Service Area coaches, other vehicles and related service areas.  Operates buses for servicing and maintenance purposes.  Practices safe work processes and performs related work as assigned. POSITION STATUS This position will be considered a "termed" position, operating Elk Grove Services, and incumbents should recognize the position could be eliminated if the contract is terminated.     Sweeps, mops, steams, scrapes and washes the interior and exterior of buses, garage floors, pits, parking lots and service areas Lifts, moves and dumps trash containers, cleans maintenance offices, storage rooms and other areas Performs daily visual vehicle inspections, reports all defects, makes non-mechanical road calls Checks and replaces consumables and equipment as necessary, replaces accessories such as light bulbs, mirrors, wiper blades and seat cushions Checks engine fluids, refilling as needed, operates CNG fueling equipment Operates a variety of equipment including forklifts, ground scrubber/sweeper, power washer, blower and upholstery cleaning equipment Installs and replaces vandal guards, fliers and advertisements in buses Cleaning of bus stops and bus shelters and all of their amenities.Power washing, graffiti removal, glass replacement, signage replacement, solar panel cleaning and lighting system replacement Makes repairs to damaged benches, broken gazing and broken structural parts Minimum Qualifications:   Education:  Graduation from high school or equivalent. Experience:  Six (6) months of full-time experience performing janitorial and/or industrial cleaning duties or a position responsible for the cleaning, maintenance and/or servicing of a variety of vehicles.   Licenses/Certifications:  Must possess a valid Driver's License at the time of application and have the ability to obtain a valid California Class B Driver's Permit with endorsement(s) prior to the start of employment.   Other Requirements:  Must have a satisfactory driving record as determined by  SacRT .  Must have the ability to pass pre-employment physical/drug screen and Department of Justice criminal background check; must have a verifiable work history and pass employment reference check. Must comply with drug and alcohol testing provisions for safety-sensitive employees as required by the FTA, Department of Transportation (49 CFR, Parts 40 and 655). (See job descriptions for complete list of special requirements, licenses and/or certificates.)   Candidates must submit an official DMV printout at time of application, dated November 7, 2019 or thereafter, at time of application, in order to be considered. Only official DMV printouts issued by the Department of Motor Vehicles are acceptable. Online DMV printout will not be accepted.   Filing Instructions:   The minimum qualifications as stated on this job announcement represent only the basic requirements of the position. Meeting the minimum qualifications does not guarantee that a candidate will be invited to participate in other examination segments of the selection process.  An employment application and official K4 DMV printout are required for this position. Applications, job announcements, and copies of the complete job description are available through our website at  www.sacrt.com .   A completed employment application and official K4 DMV printout, as outlined above, must be submitted online.  RT will not process incomplete applications.  Resumes are not accepted in lieu of an application, but may be included with the application . For more information on benefits, a summary sheet is available from the Human Resources Department. The Human Resources Department will make reasonable efforts in the recruitment process to accommodate candidates with disabilities. For more information, contact the Human Resources Department at (916) 556-0298.

 OFFICIAL DMV PRINTOUT IS REQUIRED AT THE TIME OF APPLICATION  Only official K4 DMV printouts issued by the Department of Motor Vehicles are acceptable. Online DMV printouts will not be accepted. Assists with inspections, testing, routine maintenance, and repairs on the District's light rail signal system, traction power substations, and electrical distribution system in a training capacity; performs a variety of manual labor tasks in the performance of assigned duties and in support of designated work crew's activities; participates in organizing and maintaining an inventory of parts, tools, and equipment in the workshop; practices safe work processes and contributes to the maintenance of a safe working environment for self and others; and performs related duties as assigned. Lineworker  top pay rate is upon completion of a four year Training Program beginning at 80% of the Journey  Lineworker  pay rate. Thereafter the pay rate is increased to 85%, 90%, and 95% over a maximum of 48 months in the Training Program. Assists other  Lineworker  classifications in performing inspections, testing, diagnostic  analysis and maintenance of the light rail traction power substations, electrical distribution system, signal system, traffic warning devices, highway grade crossings, power switch and electric lock mechanisms; receives and stocks inventory of parts and equipment in workshop; maintains cleanliness of the workshop and organizes tools and equipment; performs routine preventative maintenance of substation air conditioning units; performs duties as a switch tender or  flagperson  for the protection of the public, employees, and trains during emergencies and rerouting of trains; operates a variety of non-revenue District vehicles including construction and heavy equipment vehicles; and performs other related duties as assigned.   Minimum Qualifications:   Education:  High school diploma or equivalent, and successful completion of DC and AC Theory and Circuit Fundamentals coursework (5 units total) from an accredited post-secondary educational institution.   Experience:  One year of full time work experience performing basic electrical, electronic and/or electro/mechanical repairs and maintenance OR one year of full time work experience in a District  IBEW  Bargaining Unit position.   Special Requirements, Licenses and/or Certificates:  Possession of a valid Class C Driver's License; the ability to obtain a California Class A Instructional Permit with air brake endorsement prior to the start of employment; a satisfactory driving record; the ability to pass Ishihara Eye Test; required to obtain the tools for the  Lineworker  by the end of the probationary period. All employees in the  Lineworker  (apprentice) job classification must complete the District's four (4) year training program and move into the Journey  Lineworker  job classification. Candidates must submit an official DMV printout, dated November 7, 2019 or thereafter, at time of application in order to be considered. Only official DMV printouts issued by the Department of Motor Vehicles are acceptable. Online DMV printout will not be accepted. Proof of required education beyond high school, such as college transcripts, diplomas, and/or certificates must be submitted at the time of application since the AC/DC courses are required, no substitution allowed.   Filing Instructions:   The minimum qualifications as stated on this job announcement represent only the basic requirements of the position. Meeting the minimum qualifications does not guarantee that a candidate will be invited to participate in other examination segments of the selection process. An employment application is required for this position. Applications, job announcements, and copies of the complete job description are available at our website at www.sacrt.com.   Completed employment application, official K4 DMV printout, and proof of education, as outlined above, must be submitted online.  RT will not process incomplete applications.  Resumes are not accepted in lieu of an application, but may be included with the application.  For more information on benefits, a summary sheet is available from the Human Resources Department.  The Human Resources Department will make reasonable efforts in the recruitment process to accommodate candidates with disabilities. For more information, contact the Human Resources Department at (916) 556-0298. SacRT has a stand alone pension plan which is not part of, nor does it have reciprocity with CalPERS. RT is an Equal Opportunity Employer. EOE – Minorities/Women/Disabled/Veterans  

Now Hiring HVAC Design Consultant SKILL SET: Strong selling/influence/persuasion/closing skills Highly competitive Comfortable conducting face to face cold calls with businesses within the local territory on a daily basis Strategic thinking Disciplined work habits REQUIREMENTS: Ability to work independently, with excellent communication skills, making sales calls in a fast-paced environment Strong desire to be in outside sales Ability to overcome objectives and retain a positive attitude Must have a valid driver’s license, good driving record Up to five years experience recommended “not required” If you think you have what it takes to join our team-  Apply Today ! Bell Brothers, Plumbing, Heating & Air offers a comprehensive benefits package including: Potential first year earnings between $60,000-$130,000 plus Company Vehicle Medical, dental, vision benefits Company-paid Life Insurance Paid holidays and vacation 401(K) plan with generous company match Paid training in products and sales methodology Employment Type:  Full-Time Compensation:  $60,000 annually (plus commission)

The City of Davis is seeking experienced and dynamic individuals to join our team.   We currently have (2) full time positions available in our Finance Department.     We offer excellent benefits to include: paid vacation, paid holidays, paid sick leave, monthly premium allotment toward medical and dental plans, flexible spending and dependent care accounts, deferred compensation plans, bike and computer loans, various voluntary plan options and excellent CalPERS retirement! For additional benefit information, please click the benefits tab on the job posting.   DEFINITION To perform routine to moderate financial record keeping and clerical and technical accounting duties related to the processing and preparation of accounts payable, accounts receivable, and maintenance of accounting records; to performs a variety of customer service tasks, working directly with the public and other city staff in response to inquiries and complaints. DISTINGUISHING CHARACTERISTICS  Accounting Assistant   - This is the journey level in the Accounting Assistant series. Positions at this level perform a variety of difficult and responsible clerical and technical accounting duties on behalf of division operations. Once trained, employees at this level receive only occasional instruction or assistance as new or unusual situations arise. At this level incumbents are expected to have an understanding of the recordkeeping system and related transactions, and apply standard bookkeeping practices and basic accounting principles. Senior Accounting Assistant   - This is the advanced journey level in the Accounting Assistant series. Positions at this level perform more complex technical accounting tasks and respond to difficult customer service questions and situations. At this level, incumbents are expected to be fully aware of the operating procedures and policies of the division and demonstrated  competency in the core functional area where assigned. Positions at this level are distinguished from the Accounting Assistant by the level of responsibility assumed, the complexity of duties assigned, the increased independence of action and concurrent increase in the consequence of error. Positions may provide technical and functional supervision over lower level staff. This position may function in any of the functional areas within the division and once fully trained is expected to show demonstrated competency in at least one of three principal accounting functions: collection of revenues, disbursements of funds, or financial reporting.  SUPERVISION RECEIVED AND EXERCISED Accounting Assistant Receives general supervision from higher level supervisory or management personnel. May receive technical or functional supervision from higher level staff.   Senior Accounting Assistant Receives direction from higher level supervisory or management personnel.  May provide technical and/or functional supervision to lower level staff.   FOR A FULL DESCRIPTION, PLEASE VISIT US AT WWW.CITYOFDAVIS.ORG  AND SEARCH FOR JOBS.

General Summary With direction, own design construction, development, testing, implementation, and technology delivery for business needs throughout VSP Global.  Sr. Software Engineer is responsible for technical aspects of the entire process of agile development for large complex projects.  Sr Software Engineer may supervise or coordinate activities of other personnel as necessary within Agile development cycle. Essential Functions Utilize user stories to develop  technical  requirements to ultimately deliver new or modified unique expert level programs, features, or  modules, in a timely and cost – effective manner   Generate design and development plan using new applicable technology and current tools and techniques to provide expert code for to accomplish highly complex business and technology needs, ulitmately achieving competitive advantage for the business   Provide technical leadership  to coworkers throughout coding and project progression   Provide descriptive technical visual program specifications for use in development process   Participate in  coding, testing, through implementation within an agile environment, ensuring all designs are maintainable, and in accordance with GTS technology architecture, hardware, cross environments, and aid to achieve the future technological vision   Determine root cause for the most complex software issues develop practical efficient permanent technical solutions   Modify and maintain existing systems for adaptation to business, and / or technology changes   Conduct system analysis, and contribute to system planning operations for highly complex projects   Utilize unique expert technical knowledge to influence GTS system architecture, and future technological vision   Mentor Software Engineers to allow for skill/knowledge development through advice, coaching, and training opportunities   Help define and develop the test and production environment, coordinate the migration of the system, and/or coordinate efforts with other GTS projects   Adhere to architectural guidelines, standards and delivery discipline processes, while also influencing architectural planning; document the various computer systems enhancements/modifications or information retrievals/updates and update/create procedures   Interact and effectively communicate with business partners and other GTS staff; be seen as a technical expert throughout GTS, and utilize this expertise to provide technical advice and support   Remain current on new technologies and available vendor packages; evaluate and make recommendations as necessary, and introduce applicable technologies in alignment with VSP goals and for creative solutions   Determine process improvements, best practices, and develop new processes as deemed necessary   Drive constructive change and provide leadership   Job Specifications   Typically has the following skills or abilities:   Bachelor’s Degree in Computer Science or related field   Minimum 8 years of programming experience   Advanced programming experience in current programming language   Broad experience designing, programming, and implementing large information systems   Highly developed unique expert knowledge of application of computer science, and engineering of technology   Ability to independently provide in – depth evaluation and analysis of unique complex technological issues   Provide detailed evaluations and practical solutions that take into account all dynamic intangible factors to obtain functional results   Independently determine procedures for new technological processes or special assignments   Excellent analytical and problem - solving skills for even complex problems   Excellent organization and time management skills   Influence organizational best practices to better suit organization needs   Identify and mitigate risks; contribute to risk management plan   Excellent written and verbal communication skills to employees of all levels   Demonstrated ability to direct others to optimal outcomes Ability to regularly exercises discretion and independent judgment in the performance of his/her job duties   Preferred Skills Experience architecting, implementing and supporting high performance scalable Java applications. Candidate must have experience developing large, complex Web applications. Specifically, the individuals will be working on the development and support of VSPs International portals. These enhancements may include architecture reengineering, GUI modernization. Additional requirements include: + Experience developing complex web applications using Spring, Struts, Play, Angular, Java, Java Script, JQuery, and JSPs + Experience developing Rest APIs + Working knowledge of continuous integration using tools such as Jenkins, Mavin, and Chef + Proficient in test automation using Cucumber, Jbehave, JMeter or similar tools. + Understanding of troubleshooting and performance tuning using tools such as Nagios, Wiley and or Splunk +Previous experience working on an Agile (Scrum) scrum team . Working Conditions / Physical Demands The working environment is generally favorable lighting and temperature is adequate, and there are no hazardous or unpleasant conditions caused by noise, dust etc.   The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification.  It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job grade.       The information above describes the general nature of the position and serves as a summary of the typical job functions. It's not a comprehensive list of all possible job responsibilities, tasks, or duties.   VSP Global is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to gender, race, color, religion, sex, national origin, gender identity, sexual orientation, disability or protected veteran status.    We maintain a drug-free workplace and perform pre-employment substance abuse testing. Nearest Major Market:  Sacramento  Job Segment:  Ophthalmic, Developer, Computer Science, Risk Management, Information Systems, Healthcare, Technology, Finance

VSP Global is comprised of five complementary businesses that combine high-quality eye care insurance, high-fashion eyewear, customized lenses, ophthalmic technology and retail solutions, with employees in over 23 countries. No matter the role, we’re all focused on a singular mission: to help people see. Learn more by visiting  https://vspglobal.com/cms/careers/ General Summary As a key member of the Internal Audit team, the Senior Internal Auditor will perform internal audit and consulting work and report on the results with minimal supervision. Responsible for assisting to develop and complete integrated internal audits, participate in implementing/maintaining SOX/NAIC documentation and testing. Contribute to a developing and growing Internal Audit Department. Essential Functions Prepare all work papers and execute a comprehensive audit approach (policies, procedures, processes, controls and measures) to address financial, compliance, IT and operational risks in accordance with professional standards   Evaluate risks and assist with development of audit plans and audit programs.  Determine the appropriate scope and procedures for each assignment and obtain management approval   Perform and ensure all phases of audits including planning, fieldwork, analysis reporting results and subsequent follow-up procedures are completed and communicated. Participate in special audit projects as assigned   Analyze and evaluate the audit findings arising from the examination and verification of records.   Communicate audit results and prepare written documentation/reports as it relates to SOX and Internal Audit and disclose all significant deficiencies to management    Initiate follow-up of responses for all assigned audit projects. Evaluate adequacy of corrective action indicated in the formal reply to the audit report   Test and assist in monitoring the Company’s SOX/NAIC Internal Control activities and compliance   Document internal control systems to be used for internal and external audits including narratives, flow charts, and checklists   Participate in system implementation project to ensure effective design and implementation of internal controls as well as the overall effectiveness of project management   Assist in conducting reviews of IT systems to assess the adequacy of internal controls and compliance with Company and departmental goals, objectives and standards   Coordinate with and assist external auditors during their fieldwork   Keep management apprised of audit progress and issues and effectively delivering audit results   Job Specifications Typically has the following skills or abilities:   Bachelor's degree in finance, accounting and/or equivalent experience   Five years of auditing experience, including anti-money laundering   Demonstrated experience with entity-wide SOX/NAIC implementation and testing   Demonstrated experience in auditing an SAP environment   Strong knowledge of data analysis/audit software (e.g. ACL/IDEA)   Demonstrated knowledge of GAAP, GAAS, IIA and ISACA standards   Have one of the following certifications: CPA, CIA and/or CISA   A proven track-record of effectively leading projects   Proven ability to effectively communicate information to a wide variety of technical and non-technical individuals or groups at all levels of the organization Ability to multitask and work on various audits and projects in different phases   Ability to work effectively and prioritize tasks in a deadline-driven environment   Be highly analytical and inquisitive, dig deep to obtain a solid understanding of business processes and internal controls   Excellent written and verbal communication skills    Be able to work independently and in teams   Ability to travel approximately 25% of the time   Clean credit history as reported by credit report Working Conditions / Physical Demands The working environment is generally favorable, lighting and temperature are adequate, and there are no hazardous or unpleasant conditions caused by noise, dust, etc.       The above information in this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. VSP Global is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to gender, race, color, religion, sex, national origin, gender identity, sexual orientation, disability or protected veteran status.    We maintain a drug-free workplace and perform pre-employment substance abuse testing. Nearest Major Market:  Sacramento  Job Segment:  Audit, Ophthalmic, Accounting, Consulting, ERP, Finance, Healthcare, Technology Apply now   Find Similar Jobs: VSP Vision Care Jobs,   Testing Jobs In Sacramento,   Technology Jobs In Sacramento,   Project Manager Jobs In Sacramento,   Finance & Accounting Jobs

SBM Site Services is hiring an   Accounts Receivable Technician   at our corporate headquarters in Sacramento, CA.  The Accounts Receivable Technician is responsible for preparing and distributing customer billing, following up with customers to ensure timely payments and preparing multi-jurisdiction Sales-Tax returns.  Responsibilities Review customer contracts and extract critical information related to billing Research and understand sales and use tax laws in multiple states and apply that knowledge to customer billing Process all billing transactions accurately and efficiently to meet expected deadlines Interact with customers and employees to research and resolve disputes Issue billing adjustments Contact customers in a professional manner via telephone and/or email to resolve past due accounts Determine what accounts needs to be escalated to managers for resolution Maintain a log of all contact and planned resolution for delinquent accounts and provide a weekly detailed report to Management Reconcile customer invoices and payments as needed Assists with related special projects as required Prepare accurate monthly sales/use tax returns ensuring compliance JOB REQUIREMENTS Associate’s degree (A.A.) or equivalent from a two-year college or technical school; or six months to one year related experience and/or training Proficient knowledge of MS Office, Adobe; experience with JD Edwards Oracle and Vertex Tax System applications a plus Knowledge and understanding of multi-jurisdictional sales/use tax is required Available Shift:  Full Time Compensation:  Depends on experience 

Overview SBM Management is searching for a   Safety Manager ! The Safety Manager p lans, directs, and implements organization safety program to ensure safe, healthy, and accident-free work environment by performing the following duties personally or through subordinate supervisors.   Responsibilities Plans and implements safety policies and procedures in compliance with local, state, and federal Occupational Safety and Health Administration (OSHA) rules and regulations. Plans and implements programs to train managers and employees in work site safety practices, fire prevention, and correct handling techniques for chemicals, toxins, equipment, and other materials. Prepares studies and analyses of industrial accident causes and hazards to health for use by company personnel and outside agencies Inspects organization facilities to detect existing or potential accident and health hazards, determines corrective or preventative measures where indicated, and follows up to ensure measures have been implemented. Provides information, signs, posters, barriers, and other materials to warn of potential and actual safety hazards and to prevent access to hazardous conditions Leads the investigation of accidents and injuries and cooperates in the preparation of material and evidence for organization use in hearings, lawsuits, and insurance investigations. Compiles and submits accident reports required by regulatory agencies. Oversees the administration of workers' compensation program, including working with the insurance carrier to reduce employee lost time Prepares and arranges safety exhibits and material for display, promotional work, industry conferences, and exhibitions. Represents the organization in community or industry safety groups and programs Maintains safety files and records Some travel may be required for this position. Qualifications Bachelor’s degree (B. A.) from four-year college or university; or four to ten years related experience and/or training; or equivalent combination of education and experience Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Bilingual in Spanish a plus Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables To perform this job successfully, an individual should have knowledge of Spreadsheet software and Word Processing software. Available Shift: Full time   Compensation: Depends on Experience

SUMMARY OF POSITION: The Expeditor checks windows to ensure customer requirements are met and preps window for warehouse and shipment delivery by performing the final steps of wrapping the window. KEY DUTIES & RESPONSIBILITIES: Match and marry frame and vent to form a finished window assembly Perform visual quality inspections to ensure proper functionality of the finished window assembly Apply appropriate company and regulatory labels to the frame Hand clean and prepare window for shipment Load finished window assembly to delivery cart using proper loading procedures and care handling to assure product is protected from damage Move empty cart into staging area Wrap rope around cart handle and set brake Pull window out of rack and place on expeditor rack Remove stickers and labels as needed Install screen and put labels and stickers on glass Install balances as needed Place cardboard on corners and wrap with plastic wrap, placing finished product on cart When cart is full, wrap rope around the windows and move to warehouse staging area Constantly monitors personal and surrounding work area to ensure that areas are clean and free of hazards. Maintains all equipment and tools in peak operating condition, calls for maintenance as needed, and constantly inspects machinery for damage Creates and executes MPS plans, meets MPS commitments and works within the guidelines of MPS; reflects Milgard’s business values and the Milgard philosophy in all business interactions Incorporates Milgard’s vision and values into day-to-day activities and behaviors; guides and motivates others to remain committed to the Milgard philosophy. Adheres to all facets of safety policies and procedures. The above statements are intended to describe the general nature and level of work being performed by employees in this position. This is not intended to be an exhaustive list of all responsibilities. EXPERIENCE REQUIRED: One or more years of work experience and demonstrated job stability EDUCATION/LICENSES/CERTIFICATION/FORMAL TRAINING: High school diploma or GED ESSENTIAL ABILITIES: Ability to read, write, and apply basic math skills Ability to work under pressure and meet deadlines PHYSICAL REQUIREMENTS: Prolonged standing and repetitive motions, bending, stooping, pushing, and pulling Required to repetitively lift up to 75 lbs Hand dexterity and strength Overtime is required, including some weekends WORK ENVIRONMENT: Fast paced production environment in manufacturing facility Elevated noise levels requiring the use of safety protective devises Seasonable cold/hot depending on season Work surfaces are concrete. Personnel will stand while performing their respective job functions, for up to 12 hours a day. Milgard does not tolerate discrimination of any type, and offers equal employment opportunity to all qualified persons without regard to race, color, religion, sex, natural origin, age, disability or medical condition, sexual orientation, marital status, veteran status or any other considerations made unlawful by Federal, State or local laws. We believe in providing eligible and qualified employees with opportunities to advance. Milgard is an at-will employer.

Shift- 5am-3pm with Overtime expected Clearly the best Production Worker Position! Milgard employees are clearly the best! Join our team and be part of a company that has been recognized for quality and innovation and was recognized as one of the 50 most engaged workplaces. Our Story Founded in 1958 Milgard Windows & Doors, a division of Masco Corporation, offers a full line of wood, aluminum, vinyl and fiberglass windows as well as patio doors for builders, dealers and homeowners. With 7 manufacturing plants and 5 customer care centers across the Western US and Canada, Milgard has been established as a leading supplier of exceptional products for both new construction and the remodeled market place and is backed by a Full Lifetime Warranty, including parts and labor. Growth Opportunities! Milgard’s history and growth is due to the strength of our employees. For this reason we are committed to the principles within the Milgard Philosophy; focus on the customer, cultivate high performance team, respect for the individual, continuously improve, and drive for results. We value each employee and seek people with unique strengths. If you enjoy working in a quick-moving, deadline-driven environment, and are seeking long term employment with opportunity for growth, this position is for YOU! At Milgard we invest the time to get to know your career objectives and will place you on the right path. No experience, no problem! We hire for attitude and train for the skills needed. How would you make an impact as a Production Worker? Enjoy working in a fast paced environment Working safely with power hand tools and regularly lifting up to 75lbs Efficiently build windows to standard work processes Rotate through different duties of assembling, cutting, and loading windows. Work in a team environment What do you get in return? We have a robust total rewards offering including items such as: Performance Bonus Icentive – your efforts are rewarded! PTO – your time is your own – enjoy it! Medical/Dental/Vision – Milgard picks up the majority cost of these important benefits! 401k with a match – 100% of the first 4% Tuition assistance – continue your education; we’ll help! Career growth opportunities – take on more responsibility and grow! Tell us about yourself by applying through our career portal at  and follow us on :   https://masco.wd1.myworkdayjobs.com/Milgard    our Facebook Career Page to see just how great it is to be part of the Milgard Team! Masco Corporation   is an equal opportunity employer. Applicants are considered for all positions without regard to race, color, religion, gender, sexual orientation, protected status as a veteran, national origin, age, disability, genetic information, gender identity, or any other legally protected status under federal, state or local law. Masco Corporation  is an E-Verify employer. E-Verify is an Internet based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA) that allows participating employers to electronically verify the employment eligibility of their newly hired employees in the United States. Please click on the following links for more information. E-Verify Participation Poster:  English & Spanish E-verify Right to Work Poster:  English ,  Spanish No visa sponsorship is available for this position, unless specified within the job description.

Have you considered teaching as your next career? If you are an industry professional in the fields of science, technology, engineering or math (STEM), you can inspire the next generation of innovators. Transition to teaching middle or high school in the next 1-3 years. Students need role models like you with expertise and leadership in their field. The EnCorps STEM Teaching Fellowship is a rigorous on-ramp to a teaching career — offering you the field experience, knowledge and connections to ensure you thrive. The Teaching Fellowship provides a guided pathway into teaching for STEM industry professionals that can be started while you are still working . EnCorps is looking for passionate STEM industry professionals who want to make a difference in urban education and have at least 3 years of full time work or research experience in a science, technology, engineering or math related industry. (Please see our full eligibility criteria: http://encorps.org/join/eligibility/ .) Apply online at http://encorps.org/apply by our WINTER DEADLINE: November 15, 2019 As an EnCorps Teaching Fellow: Train to teach this winter by volunteering 2-5 hours per week in a local classroom as a guest teacher Receive mentorship and coaching from EnCorps staff and an experienced host teacher Complete teaching exams with support from EnCorps In the spring, enter a teaching credential program, either in person or online Engage in a robust slate of professional development and collaborate with a cohort of peers Begin your teaching career in a school district or charter network by fall 2020 (or beyond if you wish for a longer transition timeline) “I saw a spark in those kids, I want to see more of that. If I can be a little inspiration to them that would be worth it.” - EnCorps Fellow Erika Parker Find out more Visit our website at http://encorps.org/ or check out our next EnCorps Live Q & A Session online at http://encorps.org/join/calendar-of-events/ Get in touch with Sue Pitts, Recruitment Coordinator, at susan.pitts@encorps.org or 510-560-6605

Job Summary : The Accountant is responsible for assisting in the preparation, review, and analysis of financial statements and various reconciliations. Qualifications :  Degree in accounting or finance preferred. Strong working knowledge of GAAP. Experience in financial reporting and general ledger environment required. Familiarity of financial systems. Proficiency with Microsoft Excel and Access software required. Essential Job Functions: Reconciles bank accounts and supports cash management functions. Actively participates in the month-end closing process. Prepares month-end journal entries. Work with department leaders to ensure financial statements are accurate. Completes balance sheet reconciliations on a monthly basis and researches all variances. Reconciles and tracks capital projects and fixed assets. Supports areas of accounts payable, inventory, and payroll. Produce daily, monthly, quarterly, and annual reports as requested by the Accounting Manager. Assists with internal and external audits. Assists in special projects as required. Adheres to regulatory, departmental, and company policies. Other duties as assigned. Physical, Mental & Environmental Demands:           Must be able to continuously maneuver around office, effectively work at a desk and respond to written and aural cues.  Must have the manual dexterity to operate the computer and other necessary office equipment.  Must be able to respond calmly to demands of internal customers and work in pressure situations.  Must work some weekends, holidays and late schedules when needed. Must be able to work independently.  Must be self-motivated and able to handle more than one function at a time by being well organized.  Must be able to read, write, speak and understand English. Harrah’s reserves the right to make changes to this job description whenever necessary.  It is our  policy  to provide  equal employment opportunity  to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Preference is given to qualified Buena Vista Me-Wuk tribal members and members of other federally recognized tribes

Job Summary: Under the general direction of the Chair and COO, provide leadership in the management of department operations ensuring high-quality administrative support is provided to all internal and external partners. Prepare strategic plans for finance development, (including recharge rate development), equipment and space administration, business processes and industrial affiliate interactions. Ensure safety protocols, training, and necessary implementations are in compliance. Advise on leadership issues. Serve as back-up support to the COO. Manage the day-to-day operations of the Department of Biomedical Engineering, including but not limited to strategic and budget planning, fiscal control, compliance, risk management, facilities, payroll/personnel, academic personnel hiring and purchasing activities. Develop and maintain a positive, cooperative and supportive environment consistent with the UC Davis Principles of Community; provide leadership in a high performance department. Responsible for effectively and ethically leading staff and overseeing a complex translational research, teaching and recharge center environment. Serve as the compliance officer for the recharge centers, departmental business processes as it relates to extramural funding and University Policy and Procedure. Serve as the principal trainer and resource for business office staff on financial procedures and policy. Responsible for overseeing pre- and post-award processes, budget preparation, analysis and forecasting for control of complex budgets. Physical Demands: Sit at computer or extended periods of time. Lift boxes of files weighing up to 25 lbs. Work Environment: UC Davis is a smoke and tobacco free campus effective January 1, 2014. Smoking, the use of smokeless tobacco products, and the use of unregulated nicotine products (ecigarettes) will be strictly prohibited on any UC Davis owned or leased property, indoors and outdoors, including parking lots and residential space. Work in open, cubicle environment and with some surrounding noise. Work flexible schedule to meet project deadlines and/or operation needs. Background Check Required: This position is a critical position and subject to a background check. Employment is contingent upon successful completion of background investigation including criminal history and identity checks. Yes Qualifications Minimum Qualifications: Knowledge of Principles of Budgeting, Accounting and Control. Successful award funding, project development and project management experience. Experience gathering and synthesizing large amounts of complex information. Excellent writing skills. Experience with management of complex federal and state contracts and grants. Experience working with sponsoring agency requirements related to OLAW, IACUC, and IRB's for human subjects studies. Experience serving as departmental compliance officer for federal awards, state and private foundation awards and industry awards. Experience with recharge services, operations and facilities administration and management. Experience establishing and maintaining effective working relationships with those contracted in the course of work. Interpersonal and oral communication skills sufficient to coordinate with a wide range of personnel, including supervisors, faculty, postdoctoral researchers and investigators, and graduate students. Skills to use computer applications such as Microsoft Word, Microsoft Excel including pivot tables, and Microsoft Outlook. Organizational and time management skills to meet deadlines and manage assigned work as well as to schedule production, organize information, and maintain accurate records. Problem solving and decision-making skills. Preferred Qualifications: Knowledge of UC policies and departmental operating procedures. Experience providing leadership in the areas of strategic planning, equipment and space administration, and business processes. CRA (Certified Research Administrator) certification preferred or an equivalent combination of education and experience. Experience in effective use of multi-user computer network systems and applicable financial management software (Kuali, DaFIS and PPS preferred). Proficiency in MS Office Suite. Communication skills to convey recommendations to PI's, managers, and staff to ensure compliance with policy. Skills to recognize problems with cost recovery, invoices, accounts and payroll and initiate timely and appropriate action to resolve them. Experience coordinating documents and projects with Business Contract and Legal Affairs and to interpret regulations or guidelines and to recommend fiscally responsible and sound management practices. Organizational skills to work with changing priorities and demanding workload and to use judgment to make logical decisions. Interpersonal, verbal and written communication skills to clearly and effectively interact with a diverse group of individuals; secure and/or provide information to clarify situations, resolve problems, and negotiate services and/or agreements and MOU's with other departments or external agencies. Managing personnel issues.

Victory Automotive Group   is family owned and operated since 1997 with over 40 locations across the United States. We provide the best opportunities for all employees, customers, communities and each manufacturer we represent. Our continued commitment is to improve our dealerships and services to satisfy our customer’s wants and needs 100 percent of the time and always provide a pleasant, informative and professional experience. Victory Automotive Group   is always looking for talented, self-motivated individuals to join our team. If you think you are ready to be a part of an exciting team, then we encourage you to continue with this applicant friendly, online job application! Victory Automotive Group is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status. We recognize and respect the amount of time you are about to invest by applying to this open position. If you complete this job application, you will be kept informed via email status updates (and text messages, if you opt in) throughout the evaluation process. By continuing with this job application, you will be asked to answer job-specific questions. Please note that the questions contained in this job posting are our sole intellectual property. Upon receipt of your responses, we will evaluate your submission. If selected for a personal interview, you will receive an email/text with scheduling instructions. Thank You, The Hiring Manager SPECIAL NOTE: If you do not receive a confirmation e-mail within minutes of your job application submission, please check your email bulk or spam folders .   JOB DESCRIPTION SACRAMENTO/FOLSOM AREA ***TOP PAY AND SIGN ON BONUS FOR ALL LEVELS OF AUTOMOTIVE TECHNICIANS*** $25 HOURLY AND UP, PLUS SIGN ON BONUS  BASED ON EXPERIENCE  If you're highly motivated and willing to work hard, we offer the most competitive pay scale in a professional work environment.  The  Entry Level Service Technician  performs routine service inspections and completes standard maintenance jobs. In addition, he or she may be assigned to conduct pre-delivery service on new vehicles to ensure excellent working order for the customer. We deliver the highest quality service while maintaining the highest level of customer satisfaction. The  Certified and Master Certified Service Technician  services and repairs vehicles as assigned by management following all established standards and procedures. In addition, he or she may be assigned to conduct pre-delivery service on new vehicles to ensure excellent working order for the customer. We deliver the highest quality service while maintaining the highest level of customer satisfaction. The ideal candidate has the willingness to want to learn the skills of the Service Technician.  Possible experience may include: a high school diploma or GED, some post-secondary automotive training, dealer-level or large facility experience, and/or any additional certifications, such as certification by the National Institute for Automotive Service Excellence (ASE).  An unrestricted driver's license and a clean driving record, a strong technical performance record, and strong physical dexterity and stamina to get the job done are required. He or she must be able to work productively in a fast-paced team environment and must have a positive attitude, professional appearance, great communication skills, and the ability to deliver world class customer service. This job description summary outlines core aspects of this position, but additional duties may be required on a routine basis. This job description does not constitute the complete responsibilities for this position. RESPONSIBILITIES Entry Level Tech performs routine service inspections or tests and completes standard maintenance jobs Certified and Master Certified Tech diagnoses issues based on experience, analysis and testing Certified and Master Certified Tech repairs automobiles and light trucks as assigned Master Certified Tech maintains highest level of training possible Maintains cleanliness of vehicles while performing service or repairs Ensures that required documentation is complete and is in compliance with regulations and standards Helps maintain shop appearance and safety standards and ensures the shop runs in an efficient manner by performing duties such as inventory stocking and other general functions Follows all shop policy, procedure, safety, and environmental rules Attends all staff meetings, trainings, and educational classes as required Performs other duties as assigned QUALIFICATIONS High school diploma or GED a plus Broad scope of automotive mechanical/electrical knowledge Unrestricted driver's license and clean driving record Entry Level Tech may have post-secondary automotive training or equivalent work experience Able to drive both automatic and standard-transmission vehicles Entry Level Tech might have dealer-level or large facility experience Excellent interpersonal skills to interact professionally with customers, vendors, and staff Highly professional and dependable Safety and customer service oriented Basic computer and internet skills Able to bend, kneel, squat, stand, and lift heavy objects as needed Master Certified Tech must have post-secondary automotive training or equivalent work experience Master Certified Tech should have dealer-level or large facility experience Master Certified Tech must have a high level of automotive mechanical/electrical knowledge BENEFITS Competitive Pay Based on Experience Medical Benefits Paid Vacation Holidays Ongoing Training and Mentoring Professional Workplace Non Smoking Workplace Drug Free Workplace Opportunity for Advancement 401(k) with Company Match Direct Deposit

Victory Automotive Group   is family owned and operated since 1997 with over 40 locations across the United States. We provide the best opportunities for all employees, customers, communities and each manufacturer we represent. Our continued commitment is to improve our dealerships and services to satisfy our customer’s wants and needs 100 percent of the time and always provide a pleasant, informative and professional experience. Victory Automotive Group   is always looking for talented, self-motivated individuals to join our team. If you think you are ready to be a part of an exciting team, then we encourage you to continue with this applicant friendly, online job application! Victory Automotive Group is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status. We recognize and respect the amount of time you are about to invest by applying to this open position. If you complete this job application, you will be kept informed via email status updates (and text messages, if you opt in) throughout the evaluation process. By continuing with this job application, you will be asked to answer job-specific questions. Please note that the questions contained in this job posting are our sole intellectual property. Upon receipt of your responses, we will evaluate your submission. If selected for a personal interview, you will receive an email/text with scheduling instructions. Thank You, The Hiring Manager SPECIAL NOTE: If you do not receive a confirmation e-mail within minutes of your job application submission, please check your email bulk or spam folders .   JOB DESCRIPTION VICTORY AUTOMOTIVE GROUP ***8 TENNESSEE, 2 NORTH CAROLINA AND OUR ALABAMA DEALERSHIPS*** The Automotive Service Manager (ASM) acts as the primary contact between the dealership and customer for all repair and maintenance services. He or she listens to and thoroughly understands a customer's service/repair needs, sets and manages the customer's expectations, and works closely with the service team in order to stay informed of the status of repairs and special orders. The primary goal of the ASM is to provide the highest level of customer satisfaction and maximize the sale of parts and service for the dealership. The ideal candidate has a high school diploma or GED, some post-secondary automotive training, and at least two years of dealer-level or large facility experience that includes some supervisory/management responsibilities. Certification by the National Institute for Automotive Service Excellence (ASE) is a plus. An unrestricted driver's license, a clean driving record, and a strong technical and customer service performance record are required. He or she must be able to work productively in a fast-paced team environment and must have a positive attitude, professional appearance, great communication skills, and the ability to deliver world class customer service. RESPONSIBILITIES Ensures agreement from customer is in place before service begins and informs customer of estimated repair costs and times and accepted methods of payment Sells only required service and maintenance to customers and follows dealership service sales policy and procedures Follows up on status of repairs to ensure vehicle is ready when promised, informs customer in advance when car can’t be ready at the promised time, and obtains authorization from customers when repair estimates are revised Ensures that all completed repairs have gone through quality control and/or a road test Maintains current knowledge of vehicle operation, warranties, campaigns, and other service information, such as state lemon laws and Technical Service Bulletins (TSB) Manages and oversees staff, which includes recruiting/hiring, evaluating, scheduling, terminating, etc. Ensures all service level targets are met or exceeded Ensures that required documentation is complete and is in compliance with regulations and standards Complies with and enforces all safety policies and procedures Attends all staff meetings, trainings, and educational classes as required Performs other duties as assigned QUALIFICATIONS High school diploma or GED preferred Post-secondary automotive training or equivalent work experience Two years of dealer-level or large facility experience preferred ASE certification (or is willing to obtain certification) Broad scope of automotive mechanical/electrical knowledge Experience in supervising and managing staff Neat, clean, and professional appearance Pleasant/friendly demeanor and an outgoing personality Highly professional and dependable Excellent communication, customer service, and problem solving skills, including the ability to maintain composure under stress Excellent interpersonal skills to interact professionally with customers, vendors, and staff Basic computer and internet skills Unrestricted driver's license and clean driving record Able to drive both automatic and standard-transmission vehicles Reynolds and Reynolds experience a plus BENEFITS 401(k) with Company Match Direct Deposit Opportunity to Advance Competitive Pay Based on Experience Medical Benefits Paid Vacation Holidays Ongoing Training and Mentoring Professional Workplace Non Smoking Workplace Drug Free Workplace

DOWNTOWN FORD, CALIFORNIA If you are an enthusiastic self-starter with a passion for selling and you enjoy working with customers, then we want you to be part of our team as an Automotive Sales Consultant. The Sales Consultant is extremely knowledgeable about our vehicles and services, the industry, and our market, including vehicle selection, performance, accessories, efficiencies, safety features and functions, and financing options for both new and used vehicle inventories. He or she presents new and pre-owned vehicles to customers in an attractive and highly informative fashion that promotes a prompt sale and maintains an ongoing relationship with customers to encourage networking and repeat business. The ideal candidate has a high school diploma or GED, previous sales experience (in any industry), excellent customer service skills, a confident and outgoing personality, a professional appearance, and great communication skills. He or she must be self-motivated with a willingness to continuously prospect to sell a minimum quota (or more!) on an ongoing basis. This job description summary outlines core aspects of this position, but additional duties may be required on a routine basis. This job description does not constitute the complete responsibilities for this position. RESPONSIBILITIES Helps customer with vehicle selection and promotes model options and features, value-add products and services, and purchase and finance options following dealership policies Conducts vehicle test drives and ensures all speed limits all other rules of the road are followed Negotiates sale closure in a clear, concise, and highly ethical fashion Helps facilitate delivery by providing a clear explanation of vehicle and features operation, warranty, and servicing requirements Maintains accurate sales documentation Maintains up-to-date knowledge of all vehicles, accessories, financing options, and promotions Attends all staff meetings, trainings, and educational classes as required Performs other duties as assigned QUALIFICATIONS High school diploma or GED preferred Verifiable sales performance (any industry) Negotiation expertise Excellent communication, customer service, and problem solving skills, including the ability to maintain composure under stress Excellent interpersonal skills to interact professionally with customers, vendors, and staff Able to achieve goals with limited direct supervision Neat, clean, and professional appearance Pleasant/friendly demeanor and an outgoing personality Basic computer and internet skills Unrestricted driver's license and clean driving record Able to drive both automatic and standard-transmission vehicles BENEFITS Competitive Pay Based on Experience Medical Benefits Matching 401K Paid Vacation Holidays Ongoing Training and Mentoring Professional Workplace Non Smoking Workplace Drug Free Workplace Opportunity for Advancement 401(k) with Company Match Direct Deposit Opportunity to Advance

Victory Automotive Group   is family owned and operated since 1997 with over 40 locations across the United States. We provide the best opportunities for all employees, customers, communities and each manufacturer we represent. Our continued commitment is to improve our dealerships and services to satisfy our customer’s wants and needs 100 percent of the time and always provide a pleasant, informative and professional experience. Victory Automotive Group   is always looking for talented, self-motivated individuals to join our team. If you think you are ready to be a part of an exciting team, then we encourage you to continue with this applicant friendly, online job application! Victory Automotive Group is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status. We recognize and respect the amount of time you are about to invest by applying to this open position. If you complete this job application, you will be kept informed via email status updates (and text messages, if you opt in) throughout the evaluation process. By continuing with this job application, you will be asked to answer job-specific questions. Please note that the questions contained in this job posting are our sole intellectual property. Upon receipt of your responses, we will evaluate your submission. If selected for a personal interview, you will receive an email/text with scheduling instructions. Thank You, The Hiring Manager SPECIAL NOTE: If you do not receive a confirmation e-mail within minutes of your job application submission, please check your email bulk or spam folders .   JOB DESCRIPTION DOWNTOWN FORD, CALIFORNIA The Service Advisor is the center of communication for service/repair activities and the liaison between customers and the technicians. Serving as the primary point-of-contact for all automotive service and repair matters, the Service Advisor must listen and thoroughly understand customer problems, arrange for appropriate service/repairs, and set/manage expectations on the part of the customers and the technicians in terms of service delivery. He or she makes sure the customer knows what repairs are needed and what repairs and maintenance are recommended. No one wants to have to bring their car in, but our Advisors ensure the customer is satisfied that the vehicle will be repaired right the first time and in the shortest time possible. The ideal candidate has a high school diploma or GED, some post-secondary automotive training or experience, at least one year of dealer-level or large facility experience, an unrestricted driver's license and a clean driving record, and a strong technical and customer service performance record. ASE certification a plus. He or she must be able to work productively in a fast-paced team environment and must have a positive attitude, professional appearance, great communication skills, and the ability to deliver world class customer service. This job description summary outlines core aspects of this position, but additional duties may be required on a routine basis. This job description does not constitute the complete responsibilities for this position. RESPONSIBILITIES Schedules service for customers either in person or on the phone to ensure a prompt and accurate diagnosis of any problems Makes repair recommendations and manages delivery of repairs by setting and managing customer expectations Ensures that required documentation is complete and is in compliance with regulations and standards Complies with and enforces all safety policies and procedures Attends all staff meetings, trainings, and educational classes as required Helps educate/train new staff members Performs other duties as assigned QUALIFICATIONS High school diploma or GED preferred Ford and CDK experience a plus One year of dealer-level or large facility experience preferred Broad scope of automotive mechanical/electrical knowledge Neat, clean, and professional appearance Pleasant/friendly demeanor and an outgoing personality Excellent communication, customer service, and problem solving skills, including the ability to maintain composure under stress Excellent interpersonal skills to interact professionally with customers, vendors, and staff Unrestricted driver's license and clean driving record Able to drive both automatic and standard-transmission vehicles Basic computer and internet skills BENEFITS Competitive Pay Based on Experience Medical Benefits Paid Vacation Holidays Ongoing Training and Mentoring Professional Workplace Non Smoking Workplace Drug Free Workplace 401(k) with Company Match Direct Deposit Opportunity to Advance

Victory Automotive Group   is family owned and operated since 1997 with over 40 locations across the United States. We provide the best opportunities for all employees, customers, communities and each manufacturer we represent. Our continued commitment is to improve our dealerships and services to satisfy our customer’s wants and needs 100 percent of the time and always provide a pleasant, informative and professional experience. Victory Automotive Group   is always looking for talented, self-motivated individuals to join our team. If you think you are ready to be a part of an exciting team, then we encourage you to continue with this applicant friendly, online job application! Victory Automotive Group is an Equal Opportunity Employer that recruits and hires qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status. We recognize and respect the amount of time you are about to invest by applying to this open position. If you complete this job application, you will be kept informed via email status updates (and text messages, if you opt in) throughout the evaluation process. By continuing with this job application, you will be asked to answer job-specific questions. Please note that the questions contained in this job posting are our sole intellectual property. Upon receipt of your responses, we will evaluate your submission. If selected for a personal interview, you will receive an email/text with scheduling instructions. Thank You, The Hiring Manager SPECIAL NOTE: If you do not receive a confirmation e-mail within minutes of your job application submission, please check your email bulk or spam folders .   JOB DESCRIPTION HARROLD FORD, CALIFORNIA If you're highly motivated and willing to work hard, we offer the most competitive pay scale in a professional work environment.  We will pay for additional automotive certification training and requirements for Certified and Master Certified Technicians. The  Entry Level Service Technician  performs routine service inspections and completes standard maintenance jobs. In addition, he or she may be assigned to conduct pre-delivery service on new vehicles to ensure excellent working order for the customer. We deliver the highest quality service while maintaining the highest level of customer satisfaction. The  Certified and Master Certified Service Technician  services and repairs vehicles as assigned by management following all established standards and procedures. In addition, he or she may be assigned to conduct pre-delivery service on new vehicles to ensure excellent working order for the customer. We deliver the highest quality service while maintaining the highest level of customer satisfaction. The ideal candidate has the willingness to want to learn the skills of the Service Technician.  Possible experience may include: a high school diploma or GED, some post-secondary automotive training, dealer-level or large facility experience, and/or any additional certifications, such as certification by the National Institute for Automotive Service Excellence (ASE).  An unrestricted driver's license and a clean driving record, a strong technical performance record, and strong physical dexterity and stamina to get the job done are required. He or she must be able to work productively in a fast-paced team environment and must have a positive attitude, professional appearance, great communication skills, and the ability to deliver world class customer service. This job description summary outlines core aspects of this position, but additional duties may be required on a routine basis. This job description does not constitute the complete responsibilities for this position. RESPONSIBILITIES Entry Level Tech performs routine service inspections or tests and completes standard maintenance jobs Certified and Master Certified Tech diagnoses issues based on experience, analysis and testing Certified and Master Ceritfied Tech repairs automobiles and light trucks as assigned Master Certified Tech maintains highest level of training possible Maintains cleanliness of vehicles while performing service or repairs Ensures that required documentation is complete and is in compliance with regulations and standards Helps maintain shop appearance and safety standards and ensures the shop runs in an efficient manner by performing duties such as inventory stocking and other general functions Follows all shop policy, procedure, safety, and environmental rules Attends all staff meetings, trainings, and educational classes as required Performs other duties as assigned QUALIFICATIONS High school diploma or GED a plus Broad scope of automotive mechanical/electrical knowledge Unrestricted driver's license and clean driving record Entry Level may have post-secondary automotive training or equivalent work experience Entry Level Tech may have post-secondary automotive training or equivalent work experience Able to drive both automatic and standard-transmission vehicles Entry Level Tech might have dealer-level or large facility experience Excellent interpersonal skills to interact professionally with customers, vendors, and staff Highly professional and dependable Safety and customer service oriented Basic computer and internet skills Able to bend, kneel, squat, stand, and lift heavy objects as needed Master Certified Tech must have post-secondary automotive training or equivalent work experience Master Certified Tech should have dealer-level or large facility experience Master Certified Tech must have a high level of automotive mechanical/electrical knowledge BENEFITS Competitive Pay Based on Experience Medical Benefits Paid Vacation Holidays Ongoing Training and Mentoring Professional Workplace Non Smoking Workplace Drug Free Workplace Opportunity for Advancement 401(k) with Company Match