Mechanical Engineer

About the Position: Serve as a senior Mechanical Engineer, responsible for developing mechanical designs; performing technical reviews of mechanical designs developed by Architectural-Engineering firms (A-E) and resolving mechanical design related problems arising during construction for a wide range of conventional and unconventional mechanical design features.

Major duties
Participate in pre-design, design review, and other technical conferences or reviews conference memoranda to clarify principal technical features of and identify any special conditions.
Assist supervisor with planning, organizing and monitoring the work carried out by Section personnel in the predominantly assigned area.
Perform site investigations to secure necessary data for studies and designs.
Provide technical guidance to lower grade Mechanical Engineers and Technicians, and perform technical reviews of the mechanical engineering aspects of design packages prepared by A-E firms.
Develop Mechanical, Plumbing, and Fire Protection drawings utilizing Autodesk Revit or similar BIM software, and develops whole building energy models utilizing Trane Trace 700, Trace 3D Plus or similar energy modeling software.
Provide mechanical engineering support to Construction Division in resolving mechanical problems prior to, during and after construction for Military, Federal Facilities, and Civil Works projects.

Qualifications
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities. Current Department of Army Civilian Employees Interagency Career Transition Assistance Plan Land Management Workforce Flexibility Act Military Spouses, under Executive Order (E.O.) 13473 Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, DoD Retained Grade Preference Eligible Veterans Employment Opportunity Act (VEOA) of 1998 In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for Mechanical Engineer: A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure – Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test – Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses – Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum – Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes study, layout, and design of Military Construction (MILCON) and other federal facilities projects, including at least one of the following: formulating and resolving design issues during construction; developing whole building energy models utilizing energy modeling software; and/or performing or overseeing the technical review of mechanical, plumbing, and fire protection design products. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone–no substitution of education for experience is permitted. Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

How to apply
Please read the entire announcement and all the instructions before you begin an application. To apply and be considered for this position, you must complete all required questionnaires, assessments and submit all required documentation as specified in the How to Apply and Required Documents section. The complete application package must be submitted by 11:59 PM (ET) on the closing date of the announcement to receive consideration. The application process is as follows: Click the Apply Online button. Answer the questions presented in the application and attach all necessary supporting documentation. As a reminder, your resume must be two pages or less and must support the specialized experience described in this announcement. Resumes exceeding two pages will be removed from consideration. For additional information, refer to the 'Required Documents' section. To preview the application questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13110079 Click the Submit Application button prior to 11:59 PM (ET) on 11/16/2026. If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice. Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials. Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended. Set aside about two (2) hours to take the USA Hire Assessments; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link. Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused. For more general information, system requirements, reasonable accommodation information, and to request assistance regarding the USA Hire Assessments, review the following resources: https://appsupport.usastaffing.gov/hc/en-us/sections/28980562523540-USA-Hire-Assessments To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed. To view the announcement status or your application status: Click on this: https://help.usajobs.gov/how-to/application/status. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application.